During the last six months, we’ve added a new family member to our household, a sweet beagle puppy we named Mrs. Bananas. Trey’s sister, Michelle, had a beagle with a litter. Mrs. Bananas was the very last puppy still in need of a good home, and Trey and I just couldn’t resist! Anyway, the first few months she went through a bit of a chewing phase, to say the least.
We are through that now, but some of our furniture is a little worse for wear. One item that suffered more than others was our coffee table. Mrs. Banana’s just loved chewing up the legs of that table! It had been a hand-me-down from Rachel to Elsie to me, so I guess it was just its time to go.
I’ve been wanting to make an epoxy resin table for some time now, so I figured this was my opportunity. So as a part of our Canon USA collaboration I created this photo-heavy epoxy resin coffee table.
Related: Resin Art – Beginner’s Guide
Most of the time when I see these types of tables, people will add pennies or bottle caps to a tabletop and seal it with epoxy resin so the surface is smooth and hard. I’ve also seen a few with old (vintage photos) or with sealed-in menus (I saw one like this at a bar in Nashville last year). I decided to use personal photos along with some thin-sliced geodes I purchased locally.
Since these photos would be highly visible on a coffee table in our living room, I decided I wanted to use personal photos with an abstract feel. I used a few photos from our engagement and wedding as well as some from different places we’ve visited together (including San Francisco, Hawaii, and even our hometown). I printed my photos on 13″ x 19″ paper using our Canon PRO-100.
We created a video of how we made our epoxy resin tabletop. I watched a lot of different videos online while I was researching different types of epoxy resin products and procedures.
Most of the videos I found either didn’t explain the process well (usually they felt too vague and left me with a lot of questions), or they were exceptionally long and made the process seem way more difficult than I found it needed to be. Once I tried it I found it really wasn’t that difficult! So I kept this in mind as we worked to create our video.
Supplies:
-table with 1/4″ (or less) lip around all the edges (I wanted to use an older, found table but I never found one that fit our space AND had a lip around the edge. So Josh made me this super simple table over a weekend so it’s the exact size I wanted to fit our space.)
-photos and objects you want sealed in the table (make sure the objects are not taller than the lip of your table)
-spray adhesive or glue
-glaze coat pour-on high gloss epoxy resin* (the brand we used was from Famowood)
-disposable paper, plastic cups, or small pitchers
-disposable stir stick (I used part of a leftover dowel rod)
-disposable gloves (you may also want to wear an apron and safety goggles)
-drop cloth to cover your work area, in case of spills or drips
-masking or painter’s tape
-small, handheld propane torch (I used a kitchen torch)
*The amount of epoxy resin you’ll need depends on how large and deep the area you are covering is. My coffee table is 4′ x 5″ x 16″ with a 3/8″ depth (from the tabletop to the top edge of the lip). I used 1 gallon and 2 quarts of the epoxy resin coating.
Step One: Prepare your tabletop. If you’re using a found table, make sure to lightly sand and clean the surface where the epoxy will be poured. You’ll also want to tape off the edges. The tape will prevent the epoxy resin from oozing out of any cracks or edges while it hardens.
Step Two: Print photos. As I mentioned above, I printed my photos at 13″ x 19″ and trimmed them to fit my surface area.
Step Three: Plan design. Move your photos and objects around on the tabletop until you have a design you love. For any photos or papers use a light coat of spray adhesive or glue to set them in place.
You don’t want them to float or bubble up during the epoxy resin pouring process, so make sure they are securely in place now.
Step Four: Mix the epoxy resin. Follow the instructions, as some products will differ from others. The instructions from the brand I used had me mix the resin and hardener together in two disposable containers for four minutes, in each container. Whatever mixing duration your instructions include, be sure to follow them.
During this stage you’ll want to wear gloves, apron, and possibly safety goggles (or glasses) to protect yourself from these chemicals. You also need to work in a well-ventilated space. I worked near two large windows that I opened during this step, as these chemicals give off a strong smell.
Be careful if it’s a windy day since you don’t want particles floating into your epoxy once poured.
Step Five: Pour the mixed epoxy resin over the countertop, taking care not to add too much; otherwise it can overflow the edges.
My instructions suggested only mixing one to two quarts at a time so I had to repeat this process multiple times. If you are adding more epoxy resin (in layers), try to pour in circles or lines and avoid pouring in large clumps over one area; this will help the mixture to ooze into the proper place.
If you find you don’t have enough epoxy resin, allow your first coat to cure overnight before adding more the next day. Do not add more to a coat that is only partially cured as this can result in uneven drying, causing imperfections in your surface. If in doubt, call the technical support listed in the instructions (I did!).
Step Six: Use a small propane torch to remove any bubbles in the surface. You might feel inclined to skip this step because you don’t want to buy a torch.
As I mentioned above, I used a kitchen torch, and it made a HUGE difference in the final look of my table. You could also use a heat gun instead of torch. Any of these options will do, but don’t skip this step!
Once the surface has cured for at least 24-48 hours (although 72 is recommended), you’re ready to start using your new table! Be sure to keep it free from dust or other particles while it’s drying.
And it’s a good idea to press your finger into an edge of the table before placing anything heavy on it, just to make sure yours is, indeed, fully dry. Not too bad, right? Thanks for letting me share our new coffee table with you. xo. Emma
Love this post? Sign up for our newsletter for more ideas!
Get creative ideas for recipes, crafts, decor, and more in your inbox!
Get the How-To
Supplies
- table with 1/4″ (or less) lip around all the edges
- photos and objects you want sealed in the table
- spray adhesive or glue
- glaze coat pour-on high gloss epoxy resin (Famowood is the brand I used)
- disposable paper, plastic cups, or small pitchers
- disposable stir stick, gloves, and drop cloth
- masking or painter’s tape
- small, handheld propane torch (I used my kitchen torch)
Instructions
- Prepare your tabletop. If you’re using a found table, make sure to lightly sand and clean the surface where the epoxy will be poured. You’ll also want to tape off the edges. The tape will prevent the epoxy resin from oozing out of any cracks or edges while it hardens.
- Print photos. As I mentioned above, I printed my photos at 13″ x 19″ and trimmed them to fit my surface area.
- Plan design. Move your photos and objects around on the tabletop until you have a design you love. For any photos or papers use a light coat of spray adhesive or glue to set them in place. You don’t want them to float or bubble up during the epoxy resin pouring process, so make sure they are securely in place now.
- Mix the epoxy resin. Follow the instructions, as some products will differ from others. The instructions from the brand I used had me mix the resin and hardener together in two disposable containers for four minutes, in each container. Whatever mixing duration your instructions include, be sure to follow them. During this stage you’ll want to wear gloves, apron, and possibly safety goggles (or glasses) to protect yourself from these chemicals. You also need to work in a well-ventilated space. I worked near two large windows that I opened during this step, as these chemicals give off a strong smell. Be careful if it’s a windy day since you don’t want particles floating into your epoxy once poured.
- Pour the mixed epoxy resin over the countertop, taking care not to add too much; otherwise it can overflow the edges. My instructions suggested only mixing one to two quarts at a time so I had to repeat this process multiple times. If you are adding more epoxy resin (in layers), try to pour in circles or lines and avoid pouring in large clumps over one area; this will help the mixture to ooze into the proper place. If you find you don’t have enough epoxy resin, allow your first coat to cure overnight before adding more the next day. Do not add more to a coat that is only partially cured as this can result in uneven drying, causing imperfections in your surface. If in doubt, call the technical support listed in the instructions (I did!).
- Use a small propane torch to remove any bubbles in the surface. You might feel inclined to skip this step because you don’t want to buy a torch. As I mentioned above, I used a kitchen torch, and it made a HUGE difference in the final look of my table. You could also use a heat gun instead of torch. Any of these options will do, but don’t skip this step!
- Once the surface has cured for at least 24-48 hours (although 72 is recommended), you’re ready to start using your new table! Be sure to keep it free from dust or other particles while it’s drying. And it’s a good idea to press your finger into an edge of the table before placing anything heavy on it, just to make sure yours is, indeed, fully dry.
his DIY epoxy resin table tutorial is absolutely stunning! I love how you’ve broken down each step, making it easy to follow. The vibrant colors and sleek finish really elevate the look of any space. Can’t wait to try this out for my own home decor project!
Epoxy is so much fun to work with. I enjoy it and think that your table turned out absolutely beautiful.
Hello!! I have a question for y’all!! I am just starting to work with resins and am very excited about it!!
I have heard several times that resins can yellow on you. Is there a UV protected, anti-yellowing resin available?? I would be very disappointed if this happened to one of my projects!
Any help you have or if you could point me in the right direction to find an answer, I’d be so grateful!! Love your page!! Thank you for sharing your experience!!
Jenn Davis @ jennjdavis2424@gmail.com
Thank you for sharing this. I’ve tried to do a project like this in the past. I used colored photos and wooden lettering. I must say, had I seen the black and white photos with colorful stones, I may have reconsidered. :). I think I should have done black and white photos with colored letters. It looks amazing.
I’m new on Pinterest, however I’m interest in working with resins. You have some neat things.
Betsy
Hi, great article!
For a week I’ve trying to find great epoxy for my DIY wooden river table. I stumbled upon this article https://woodimprove.com/best-epoxy-resins-for-wood/ which reviews some good options. I think Pro Marine would a good choice but it would be great if you suggest some great product you think is better than Pro Marine. Thanks, appreciate.
If your table doesn’t have a lip, is it possible to temporarily adhere something to the edges of the table to act as a lip while pouring the resin? I think this would be really cool – to have the resin raised from the surface without a lip!
Karla if they answer your question would u email me and let me know how as well. .im afraid i might not see the answer
“So Josh made me this super simple table over a weekend so it’s the exact size I wanted to fit our space.”
Can you tell me how he made the table so it had the lip like that?
Will the resin dry flat on top?
I get resin at Michaels and Hobby Lobby and it has NO smell. My husband has asthma and I was afraid it would bother him as my poly spray over paintings does, so I waited until he was gone to do it, and low and behold no odor. He came in, in the middle of the process and I asked if he smelled it, and he said no, not near as bad as your paintings!! So you might try their resin if you do more and not have to wear the mask. I still wear the gloves though. I do quite a few canvas pours, and now I do them with resin, it must makes them look so special. On Houzz those pours costs anywhere from $399 to $1800. I made a table from a goodwill find, and I did a pour with resin and my grandkids say it looks like a screen of their video of a wormhole in space. Table $12, resin and paint less than $30.
Every time I apply resin to a picture that discolors the picture how did yours not turn color
I love your blog and was super psyched to see you working with resin. I work with epoxy resin with my artwork on a regular basis. I would strongly recommend doing this is a well ventilated area with a respirator, gloves and glasses! please please please 🙂
It is a lovely result, but it is more messy than it looks, and you can not stress out enough the importance of the lip on the table! Also drying process around 72 hours, and while it is drying you have to make sure that no particles of dust, or hair, or pets 🙂 will get in it!!
But you managed to overcome all of it with a beautiful outcome. Congrats
That looks really great. I’ve always been terrified of resin. I’ve heard it was difficult to get even and dry and clear, etc., etc. Maybe I’ll give it a try!
Hi Stacia! It cost around 100.00 🙂 – Jacki
Can you share the cost of doing your table? I am wanting to add a project like this to my DIY list, but I was wondering what the ballpark budget might be. (I know it can go up or down depending on the size of the surface.) Thanks!
this makes me want to jump and make one now! its so fun, and i love the mix of photos you used.
http://wethinkthereforewecreate.blogspot.com
I think I’m in love. We have a lot of time this summer and I’m hoping to do lots of home renovation and DIY projects throughout the months. This is definitely getting added to the list! Thank you.
Wow, it’s a great idea to convert a simple glass table into a stylish designer table using this easy method. I will try to make my old glass table stylish by using this process. Also, the way you have described it is really amazing, it will definitely help me in changing it.
Great tutorial, the table looks lovely!
Any idea if the end result is food safe? As in, if a piece of fruit fell on the table and curious kids ate it, would that be ok?